Starlink

Starlink Router Guide: Ethernet, Mesh Nodes and Using Your Own Router

Techtactix5 min read

A hand plugging a red Ethernet cable into a router's Internet port

The Starlink dish gets all the attention, but the router decides most of what you experience day to day: how far the Wi-Fi reaches, whether you can plug in a cable, and whether your existing mesh system or gaming router can join in.

Starlink has shipped several routers over the years, and the answers differ between them. This guide starts by working out which one you have, then covers Ethernet, mesh nodes, and using your own router. All specifications come from Starlink’s published spec sheets and help center.

Router Comes with Wi-Fi Ethernet Rated coverage
Router 4 Starlink V4 kit with Router 4 Wi-Fi 7, 2.4 and 5 GHz 2 ports Up to 3,500 ft²
Router 3 Starlink V4 (Standard) kit Wi-Fi 6, tri-band 2 ports Up to 3,200 ft²
Router Mini V4 or V5 kits with Router Mini; also sold alone Wi-Fi 6, dual-band 1 LAN and 1 WAN port Not stated
Built into Starlink Mini Starlink Mini kit Wi-Fi 5, dual-band 1 port (behind the Starlink Plug) Up to 1,200 ft²
Gen 2 router Older rectangular “Standard Actuated” kit Wi-Fi 5, dual-band None Not stated

If you’re not sure, the Starlink app lists your hardware under its settings. The rule of thumb: if your router has a small removable cover on the back, it has Ethernet ports underneath.

How to get a wired Ethernet connection

Router 3, Router 4 and Router Mini have latching Ethernet ports built in. Plug in a computer, game console or network switch directly. If you need more wired connections than the router has ports, add an inexpensive unmanaged network switch; it simply turns one port into several.

Starlink Mini has one Ethernet port behind its weatherproof plug. Starlink recommends its own Mini Ethernet cable so the dish keeps its weather sealing.

The older Gen 2 router has no Ethernet ports at all. This is what the Starlink Ethernet Adapter is for: a small accessory that sits on the cable between the dish and the router and adds one wired port. If you search for “Starlink Ethernet adapter” because your router has no ports, this is almost certainly the router you have.

A wireless router on a table with a phone and laptop in the background
One wired port is enough to connect a switch, a mesh node or your own router.

Starlink routers can extend their Wi-Fi with Starlink mesh nodes: additional Starlink routers that join the same network. According to Starlink’s spec sheets:

  • Router 3 works with up to three Starlink mesh nodes, and meshes with the Gen 2 router, Router 3, Router Mini and the Starlink Mini.
  • Router 4 meshes with Gen 2, Gen 3 and Router Mini nodes.
  • No Starlink router meshes with other brands’ mesh systems. You can’t add an eero or Deco unit as a Starlink node.

The Router Mini is the inexpensive way to add a node. Two things make a big difference to how well it works:

  1. Wire it if you can. Starlink recommends a wired connection between routers (Cat5e or better). A wired node delivers full speed to the far end of the house; a wireless one can only pass on what it receives. If there’s no Ethernet in the walls, the coax behind your TV outlets can carry it: see our MoCA adapter guide.
  2. If it has to be wireless, place it halfway, where it still gets a strong signal from the main router, not in the dead zone itself. Our mesh Wi-Fi vs extender guide explains why.

Using your own router: bypass mode

If you already own a good router or mesh system, you can use it with Starlink. On most kits that means turning on bypass mode, which switches the Starlink router into a pass-through and hands the internet connection to your equipment.

How it works, from Starlink’s help center:

  • Turn it on in the Starlink app, under Settings → Bypass Mode.
  • On Router 3 or Router Mini, plug your router’s internet (WAN) port into one of the Starlink router’s Ethernet ports. A violet light shows bypass is on; it goes out after an hour.
  • On the Starlink Mini, connect your router to the Mini’s Ethernet port with the Mini Ethernet cable.
  • On the original Gen 1 kit there’s no bypass setting: you replace the Starlink router with yours.

The catch: bypass mode turns off the Starlink router’s Wi-Fi completely, including any Starlink mesh nodes, and the app can’t turn it back off. The only way out is a factory reset of the Starlink router. Make sure your own router is ready before you flip the switch.

There’s a second option if you don’t want to commit: leave the Starlink router running and plug your router into it. That works, but you end up with two routers in a row, which can confuse game consoles, video calls and some smart home gear. For a permanent setup, bypass is cleaner.

If you’re choosing a router to put behind Starlink, our comparison of UniFi’s home gateways covers three popular options, including one that can combine Starlink with a second internet connection for automatic failover.

Port forwarding usually doesn’t work. On most residential plans Starlink shares IPv4 addresses between customers (known as carrier-grade NAT), so the classic approach of opening a port on your router won’t let you reach home from outside. Starlink’s help center lists which plans can get a public IP address. The workaround is a VPN that connects outward from your home, such as the one built into UniFi gateways, Tailscale, or Home Assistant’s remote access.

The router’s settings are deliberately simple. Starlink routers let you change the network name and password and a handful of options, but not much more. If you want separate networks for smart devices or detailed controls, that’s another reason people move to their own router. See why smart devices belong on their own network.

Quick answers

Does Starlink come with a router? Yes. Every kit includes one; on the Starlink Mini it’s built into the dish.

Can I use a mesh system like eero or TP-Link Deco with Starlink? Yes, with bypass mode on (or behind the Starlink router). It can’t mesh with Starlink’s own nodes, so use one system or the other.

How many devices can a Starlink router handle? Starlink rates Router 4 for up to 510 devices, Router 3 for 235, and the Starlink Mini’s built-in router for 128.

Is Router 4 worth it over Router 3? Router 4 adds Wi-Fi 7 and slightly larger rated coverage, but it uses the 2.4 and 5 GHz bands only, not 6 GHz. If your devices are a few years old, you won’t notice much difference. Our Wi-Fi 6 vs 6E vs 7 guide explains what Wi-Fi 7 does and doesn’t add.